Does The Old Ps4 Camera Work With Vr

Download Commodity

Download Article

If you have a PlayStation 4 and a PlayStation VR (PS VR), you can easily follow the on-screen instructions to set your console and system. There are two different models of PS VR, and then this wikiHow will teach you how to connect a PS4 console to either a CUH-ZVR1 or CUH-ZVR2 PS VR. The ZVR1 has a sliding cover on the processor unit, a serial number on the rear that starts with P01/P02, and a power button on the remote. The ZVR2 has a solid processor unit with a serial number on the back beginning with with P03, a ability button on the underside of the headset scope, and a wireless playing experience.

Things Yous Should Know

• Connect your processor unit of measurement to both your TV and PS4 using two HDMI cables.
• Plug your PlayStation photographic camera into your PS4.
• Connect 1 USB cable to the back of the processor unit and one to the front of your console.
• The exact concluding connection instructions will depend on which model PS VR you lot have.

Steps

1. 1

   Plug your processor unit of measurement into your TV with an HDMI cable. If your PlayStation is connected to your TV via HDMI, unplug it and apply that cable to connect the TV to the VR'due south processor unit.

   • The HDMI port looks similar a trapezoid that should also exist labeled on both the processor unit (HDMI Television receiver) and the TV.

2. 2

   Connect your PlayStation Camera to your PS4 console. Using the cable that came with the camera, plug in the photographic camera to the console at the platonic peak of 4'seven" from the flooring.

   • Equally of this step, your PS4 is asunder from your TV, only is connected to the PlayStation Camera. The VR'south processor unit is connected via HDMI cablevision to your TV.

   Advertizement

3. 3

   Plug your processor unit into your PS4 using another HDMI cable. Make certain the HDMI cable is at to the lowest degree a ane.4 to ensure data tin pass through unhindered.

   • The HDMI port looks similar a trapezoid that should also be labeled on both the processor unit (HDMI PS4) and the panel.

4. iv

   Plug in a USB cable in the rear of your processor unit and in the front of your console. Once you accept this USB cablevision setup, you'll take 2 connections between your PS4 and the VR'southward processor unit.

5. v

   Connect the AC ability cord from the processor unit of measurement and a power supply (like a wall socket). After this stride, you should accept your VR processor unit connected to power every bit well as two connections to your PS4 and one connection to your Tv; the PS4 should exist continued to a PlayStation photographic camera, a ability source, and the VR processing unit.

6. 6

   Slide the processor unit connection encompass back and plug in the VR connection cablevision. This cord has two ends that y'all'll insert into the processor unit once you lot line up the symbols on the plugs to the symbols on the ports.

   • Sliding the unit back will reveal the ports; if you lot don't slide this back, you lot won't be able to see or apply them. Y'all tin can slide the cover back when you're done to protect the ports if y'all want to.
   • If you have the CUH-ZVR2, the encompass is solid and won't slide, only the ports with the symbols you have to match with the plugs are easily visible.^[1]

7. 7

   Connect the VR headset to the connection cablevision (CUH-ZVR1 only). The connection cable's end with the PS logo will connect to the VR headset.

   • If you lot take the CUH-ZVR2, it'due south wireless and does not have these cables, so you tin can skip this step.

8. 8

   Turn on your TV and console. You lot can use one of the controllers to turn on the PS4.

9. 9

   Printing the Ability button. This is either on the in-line remote on the VR headset connection cable or on the dorsum of your headset and will turn on the VR set.

   • The lights on the dorsum of the headset should glow blue to indicate that they are connected properly.

10. 10

    Follow the on-screen instructions to update whatever software (if prompted) and apply the VR headset. If y'all're not prompted to update, you lot can continue to follow the on-screen prompts to apply the VR headset.

    • If yous need to adapt the camera settings, become to Settings > Devices > PlayStation VR > Adjust PS Camera.
    • To change your headset settings, go to Settings > Devices > PlayStation VR > Check How to Put On VR Headset.^[2]

Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Well-nigh This Commodity

Article Summary X

one. Plug-in your processor unit to your TV with an HDMI cablevision.
2. Connect your PlayStation Camera to your PS4 console.
3. Plug-in your processor unit to your PS4 using another HDMI cable.
4. Plug in a USB cablevision in the rear of your processor unit and in the front of your console.
5. Connect the AC power cord from the processor unit and a power supply (like a wall socket).
6. Slide the processor unit connection cover back and plug in the VR connection cable.
7. Connect the VR headset to the connexion cablevision.
eight. Plough on your Idiot box and console.
9. Press the Power button on the in-line remote on the VR headset connection cable.
x. Follow the on-screen instructions to update any software (if prompted) and use the VR headset.

Did this summary help you?

Thanks to all authors for creating a folio that has been read 12,779 times.

Did this article help you?

Source: https://www.wikihow.com/Connect-Vr-to-PS4

Posted by: bestthame1959.blogspot.com

Share this post